NV-652R The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) NTSC using Category-5. Baseband (composite) signals of any type are supported. The unparalleled interference rejection and low emissions of the Model NV-652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.
Specifications * | Video | Frequency Response | DC to 5 Mhz | Brightness and Sharpness Control | Adjustable | Common-mode/Differential-mode Rejection | 15KHz to 5 Mhz | 60 dB typ | Impedance | Coax, female BNC | 75 ohms | UTP, Terminal Block | 100 ohms | LED Indicators | Power On | Blue Indicator Light | Active Signal Present | Green Indicator Light | Wire Type | Network Wiring | One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) | Category Type | Cat 2 or better | Impedance | 100 ± 20 ohms | DC Loop Resistance | 52 ohms per 1,000 ft (18 ohms per 100 m) | Differential Capacitance | 19 pF/ft max (62 pF/m max) | Wire Length | See Product Chart. | Power | 12-24 VAC/DC (transformer not included) | 100mA max | One floating power supply may power multiple NV–652R Receivers | Environmental | Temperature | 0° to +50° C | Humidity (non-condensing) | 0 to 95% | Transient Immunity | per ANSI/IEEE 587 C62.41 | Mechanical | Dimensions excluding BNC | 3.00 x 1.54 x 1.10 in (76.2 x 39.1 x 27.9 mm) | Weight | 4.0 oz (100 g) | Material | Black ABS | Mounting | Two 0.175 in (4.4 mm) diameter holes 2.5 in (63.5 mm) apart | Up to ten NV–652Rs are supported by the NV-RM 8/10 Rack Panel. | * Specifications subject to change without notice. |
|